Votre partenaire pour vos composants d'automatisme
EGE Elektronik - Contrôleurs de débit - P11321 - SDI 852/2 GAPP
Livraison gratuite
Reference : SDI 852/2 GAPP
Marque : EGE Elektronik
Prix unitaire
- Prix HT
1,002.93 €
Prix TTC1,203.52 € - QuantitéPrix unitaire HT10902.637€50802.344€100752.197€
-
Quantité minimale : 1
- Quantité :
-
Description
Flow rate sensor with amplifier Magnetic-inductive measuring principle For conductive media Measuring range 40 l/min or 80 l/min Flow indication with bright red 3-digit 7 segment indication Set-up via buttons at the device
| Product ID | P11321 |
| Protection [EN 60529] | IP 65 |
| Material housing | PBT |
| Compressive strength | 10 bar |
| Medium temperature | 5 ... 60 °C |
| Electrical connection | M12 connector |
| Material sensor touched by medium | FPM, stainless steel AISI 316 Ti, PVDF |
| Reverse polarity protection | ✓ |
| Reaction time typ. | 5 ... 8 s |
| Ambient temperature | 0 ... 60 °C |
| Medium conductivity | ≥ 20 µS / cm ( water ≥ 30 µS / cm ) |
| Process connection | tube fittings for steel tubes accord. to ISO 3304 / DIN 2391 |
| Output | switching output, analog output 4…20 mA |
| Load RL | 200 ... 500 Ω |
| TYPE | SDI 852/2 GAPP |
| Measurement error | 0...10 l/min ≤ 0,2 l/min, 10,1...80 l/min ≤ 2 % of meaurement value * |
| Outer Diameter Pipe mm | 15 mm |
| Switching current max. | 200 mA (20 °C) |
| Output function | PNP-NO / NC |
| Working range electrically conductive media | 0.2 ... 80 l/min |
| Inner diameter d | 12 mm |
| Current consumption max. | 100 mA |
| Supply voltage | 24 VDC +/- 10 % |
| Medium | Water, water/glycol, conductive media |
| Note | * reference conditions according to EN 29104 |
| Accessories 2 | cable type SLG, SLW |
| Accessories 3 | Übergangsadapter G 1/4 |
| Accessories 1 | Montageplatte |
| Accessories 4 | Übergangsadapter G 1/2 |
